Yamaha Publicity on Dante-MY16-AUD card
The Dante-MY16-AUD card is now on the market. It allows the integration of the latest audio network technologies into a wide variety of digital audio products. It is already proving itself at Britannia Row, one of the biggest English service providers, whether on tour, festival or club.
Yamaha Commercial Audio makes every effort to facilitate the integration of its digital audio products with the various formats of existing digital audio networks – eliminating any risk of compatibility issues between a Yamaha system and the various proprietary technologies that exist. The Dante system, signed by Audinate, is the most recent adoption: the Dante-MY16-AUD board allows Yamaha's TXn range digital mixing consoles, DME processors and power amplifiers to take full advantage of Audinate's plug and play technology.
Each Dante-MY16-AUD card offers 16 channels of bidirectional audio (at 48 kHz; 8 channels at 96 kHz), over a Gigabit Ethernet network, with real-time network redundancy; Using multiple cards allows you to manage more audio channels.
Britannia Row has always been a quick adopter of the latest technology; it uses the Dante system with its Yamaha products. The Digital and HF Manager, Kieran Walsh, is completely satisfied with it.
At the end of 2009, Snow Patrol's UK tour integrated Yamaha DME digital processors into a Dante network, as did Ministry Of Sound's huge New Year's Eve concert at London's O2, which featured a variety of live artists and DJ sets, including Calvin Harris, Deadmau5, Justice, Plump DJs, Eric Prydz and Example.
"We had deployed a huge system on this operation; we used Dante-MY16-AUD boards, housed in a Yamaha DM1000 console, to ensure the distribution of sound throughout the site," says Kieran. "This fully integrated system performed extremely well."
The most advanced use of technology, Brit Row implemented it at the end of August, during the dance event Get Loaded In The Park, at Clapham Common in London. Four stages, scattered over the 90 hectares of the site, with many residences nearby, therefore respecting the noise level limits established by the local authorities.
"The festival has to respect very strict noise level limits; using Yamaha DME processors equipped with Dante-MY16-AUD cards, we were able to set up four perfectly independent stages, even though the audio signals for all of them were centralized at a single point on a Dante network," says Kieran. "The advantage was that we could carry out sound level control measurements from this central point."
"In this hub, the heart of the network, we analyse in real time, with the Smaart software, the signals coming to us from the four stages, which allows us to intervene to keep the overall sound level on each stage in compliance with the limits laid down – without the 'façade' sound engineers having to worry about it. This analysis/intervention is completely invisible to the sound engineers, who can therefore focus solely on their mixing."
"I think it was the first time that a built-in audio control and data network was used at a festival. We managed to achieve the lowest off-site noise levels ever measured for the Get Loaded In The Park festival: the authorities were very happy! The Dante array also allowed for a multiband compressor to be used permanently on the broadcast signal, which allowed for more subtle changes to the sound. It is more discreet to severely compress a particular frequency band than to lower it: being able to send different control data allowed us to both significantly improve the sound quality and maintain control
"It took 2.5 km of fibre to cable the entire site, so it was not at all practical to double or triple the network to transport audio and service data separately. The use of Dante really made things easier, and brought more efficient and precise control."
In addition to the Dante cards themselves, the host DME processors have obviously been a vital part of the system's success. "With EMRs, it's easy to program and use system configurations. All the functions are available, and you can build panels directly, without having to spend a lot of time on graphic design," says Kieran.
"The combination of EMRs and the Dante protocol makes it much easier to build the audio network. I hope this will help demystify the setup of all audio networks: the less they seem like 'black magic', the more they will be recognized and accepted, and the more professionals will discover the remarkable power and flexibility that audio networks have to offer."
Each Dante-MY16-AUD card includes a license for Dante Virtual Soundcard: an Audinate software that allows any Mac or PC to act as a source or destination audio device in the network. Used in conjunction with traditional audio workstation software, the computer then acts as a multi-track recording platform, without any additional hardware.